8ft rowing boat

First I build a jig on top of a table added the moulds with cutouts for the keel.gunnels and chines, then fitted the keel,gunnels and the chines cutting them flush to the moulds.

Here is how I built an 8ft wooden rowing boat at home from a book called Small boat building by Dave Gannaway [price new £1.95 I got from Ebay £5 robbers]

Jezebel

23' Sharpie motor boat on the west coast

Bog's Rowboat

Glad to see you are still working on the rowboat...  Nice photo's 0 got any more?

Andy

automatic gearbox for my boat?

Hello to all out there.My name is rikus veuger,original from holland but now living in bandung,indonesia.
I also want to build my own wooden boat and I am looking for many information by reading books and looking on the net.
But some questions I cant seem to get an answere for.So I try out here on this group.

It is maybe silly to ask but I am just curious to know why in a boat there is not a automatic gearbox.I ask this becouse I want to build a speedboat and I know that it take a lot of power to speed up the boat until it has
a surtain speed and start to get in plane.
Then you can lower the rpm of the engine but keep the speed.I thougt by using a gearbox the rpm can lower again,saving fuel and give more comfort.

My other question is about the angle of the shaft of the propellor.If the shaft and engine are on a angle it seems to me that, becouse of the direction of propellor power, the nose of the boat is lifted and the back is more down into the water.What is the use of that?
Is it not better to use a horizontal propellor,like a saildrive.It will give much more efficienty and it will be more pleasant to sit in when at lower speed becouse the boat stay horizontal.

I hope some one can give me some clear answere to one of my ,probebly silly,questions.

All the best

Rikus

ps.I already put this message in this group 2 months
ago,but in the Articles so got only one replay.Hopefully
this time more people will react.

By the way.I am a trader in East Indian Rosewood,so if anybody needs some timber I can help you to get this great wood,almost any size or quantity.

Restortation project

Hi Everyone,

I am just starting on a new restortation project on a 1950  Blackwater Gaff Sloop. The boat is just been gutted and all the interior stripped and ready for a new traditional interior to be fitted once the few hull repairs are done. It will then be re-rigged back to its original Rig. Next Spring I hope to sail it across the North Sea to Holland and Belgium  to raise Money for my son's Epilepsy Charity and to raise awareness of Epilepsy in young childern.

Curlew Update

this afternoon I predrilled the screw holes for the bench seating.  I can pull these planks out now and prime the transom (I never got around to doing it when the rest of the interior was primed).  Then I can stain and varnish the benches and get plenty of varnish in the screw holes so they are resistant to moisture.  I need to get some 1-1/4" brass woodscrews for the benches - thought I had some but I guess not...

 

A friend has given me an old wood 'Snipe' sailboat.  It sounds like the hull is not salvagable except with a tremendous amount of work but the spars and sails are in good shape so I am planning on salvaging the hardware, cleats, chocks, turnbuckles, etc., and am thinking of adapting the mast to the Curlew depending on dimensions and soundness.  Otherwise I will continue with building my own mast and using the mast hardware from the Snipe...

How's Everyone Doing...

Kind of quiet around here right now...   Summer time, family functions, FISHING, house projects, FISHING, lawn mowing, baseball games, work of course, MORE FISHING...

I am very guilty of going fishing instead of working on the boat.  It is very tough living on a lake because the sirens call is pulling me out there instead of to the garage where I have a half-finished boat lol!!!

Anyway, is anyone actually working on their boats right now?

Andy